Hope Pad Clip • Fits Tech and Tech Evo M4, X2, and V2 Brakes
Replacement reservoir cap screw for Hope brakes.
M7 Shaft/M6 Head 48mm Long
- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs
- Hoods with (FD) are Flight-Deck compatible
• Designed to keep dust and dirt out of V-Brake cable/housing systems
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool…
Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
Replacement copper washers for 5mm or stainless Hope hydraulic brake line.
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano,…
- Aheadset preload adjusting bolt
This is a drive-side stop washer for your Surly Mr. Whirly Crank. It ensures you're properly spaced out down there.
Brass compression olive for Hope hydraulic disc brakes.
Shimano E-tube Dummy Plugs - Extra E-Tube plugs for sealing unused ports on shifters or junction boxes - Sold each
Shimano Front Derailleur Cable Fixing Assembly
Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.
Replacement CINCH Preload Ring for non-driveside Race Face CINCH cranks
Replacement banjo bolt for Hayes hydraulic Brake systems.
Bleed fittings specifically designed for Hayes hydraulic disc brakes.
Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit
Bar end plugs (2)
• Compatible with Shimano, SRAM, and Campagnolo systems • Smooth surface reduces friction and improves performance • Black Teflon cables are designed for ultra-low friction and corrosion-free shifts • Stainless steel and zinc galvanized steel cables are corrosion resistant
A must-have item for all your delicate department store bike repairs.
These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head. - Galvanized - Pre-stretched - Double ended - Cable Head: Shimano/SRAM, Huret/Simplex - Defined Color: Silver - Diameter: 1.2mm - Double Ended: Yes - Disc style Huret/Simplex end is…
Basics brake cables provide value on a budget. - Pre-stretched - double ended for compatibility with SRAM/Shimano road and mountain brakes - Color: Silver - Diameter: 1.6mm - Length: 1700mm
- Thermally bonded PTFE coated slick galvanized cable for minimal friction - Premium stainless-slick low-friction, rust-resistant cable - Economy galvanized standard replacement cable - AX-2654 and AX-2657 are double ended, with both Road and MTB anchors
Shimano Rear Derailleur Cable Anchor Assembly - Fits SLX M7000-10
Basics brake cables provide value on a budget. - Double ended for compatibility with SRAM/Shimano road and mountain brakes - Pre-stretched - Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain - Color: Silver - Diameter: 1.6mm - Length: 2795mm
Strain relief for servicing RockShox Reverb hydraulic lines. - Fits all generations of Reverb
Brass hose insert for Hope hydraulic disc brakes.